Skip to main content

Tag: Prótese de zircônia

Fast dental implants treatment with Slactive implant + pure zirconia or pure porcelain prosthesis

Is it possible to carry out my dental implant treatment quickly and have the permanent prosthesis fitted straight away? This is a very common question and we understand this demand of fast dental implants. Nowadays, time is increasingly valuable and scarce, which leads to a need to complete dental treatment quickly.

First of all, it’s important to note that technology and modern techniques allow us to offer treatment with fast-healing implants, as well as completely computerized crowns and prostheses. We are talking specifically about the modern Straumann Slactive implant combined with Emax pure porcelain or Pure Zirconia prostheses .

So let’s take a closer look below and find out more about these modern dental implants. Fortunately, there are now several types of quality dental implant to choose from. All to make your implant treatment faster and more comfortable. If you’re short of time, try using rapid implants and the computerized prosthesis preparation system. With them, treatment is faster and more agile because it requires fewer treatment steps. In addition, treatment becomes more predictable and offers better technical and aesthetic results.

Fast healing dental implants: is there such a thing?

In recent years there has been a significant advance in dental implant technology. This is an expected movement, since each person has a specific demand, and implantologists and implant manufacturers need to respond to these demands. The demand for fast dental implant treatment is constant, precisely because of today’s lifestyle.

That’s why today we have implants available that cater, for example, for cases of low bone volume with short implants. Or those with high aesthetic needs(white ceramic dental implants). Or even those with a high need for bone and gum preservation(bone level implants).

Metal-free ceramic rapid dental implant

What’s more, for those patients who want metal-free dental implant treatment, we have a combination of ceramic implants and modern zirconia implant crowns. This ceramic implant not only has the benefit of no metal, but also offers rapid healing. In the case of this implant, osseointegration is expected to take 2 months. There are currently two types of ceramic implant, the first is Straumann’s Pure Ceramic implant, and the second is Neodent’s Zi white ceramic implant.

But another major demand from people is undoubtedly to speed up their oral rehabilitation by reducing the time it takes to install implants and a permanent fixed prosthesis. Pure zirconia crowns help to reduce the total treatment time.

implante slactive straumann, fast dental implants

After much research, Straumann has developed an implant surface technology called Slactive. It favors and accelerates osseintegration (a term that defines the healing and fixation of implants in the bone). In some cases, the healing period can be reduced from 6 to 1 month.

Recent studies show an excellent clinical performance of SLActive implants, both in single tooth implant treatments and in total implant treatments, and even in those using bone grafting. This is an option chosen by those patients who want a fast dental implant treatment, and are keen to use the latest technology for their implant treatment.

The definitive prosthesis is fixed in a short time after the placement of rapid implants. In some cases, implants can be immediately loaded

Oral rehabilitation with implants usually follows a timetable which, in short, is as follows step by step:

1 – Planning for dental implant surgery, with panoramic radiography and computed tomography. In many cases, an intraoral scan (digital reading) is already carried out to generate the first 3D-printed provisional prosthesis .

2 – Implant surgery. Implant surgery can be performed using the conventional technique, or through guided surgery, using the Surgical Guide, when the implant insertion sites are planned in advance. This way, once the implants have been inserted, there is no need for stitches. It is also called surgery without cuts.

3 – Installation of a temporary prosthesis, in the case of total implants or front tooth implants, which allows the patient to wait until the implants have completely healed. Dental implant healing can vary from 1 month to 4 months, depending on the type of implant chosen. It’s important to bear in mind that the chance of a successful dental implant is quite high, but it can be compromised if the patient is a smoker and doesn’t have good hygiene habits.

What happens when the implants have healed?

3 – Once the implants have healed, the process of making the final prosthesis begins, which can start with the stage of reopening thedental implants. If the type of prosthesis chosen is Emax Pure Porcelain or Pure Zirconia, the method for making the final prosthesis will be completely computerized.

4 – Installation of the final prosthesis. After this phase, which may involve making prototypes to study the color and shape of the new smile, the final prosthesis is installed on the chosen type of denture.

The use of Straumann Slactive implants means that, in some cases, the period of use of the provisional prosthesis can be reduced or even eliminated. Studies carried out by Straumann have already shown that the survival rate of the Slactive implant using the immediate loading technique after 10 years is 98.2%. This is the fastest dental implant available for those who want to speed up treatment.

What is Slactive surface technology for rapid dental implant treatment?

It is based on a sandblasting technique with large granules, which generates macro roughness on the titanium surface, followed by acid etching, which overlays the micro roughness. The resulting surface provides an ideal structure for the adhesion of bone-forming cells, which are necessary for osseointegration (integration between bone and implant). This amazing technology allows Straumann Slactive implants to be the fastest healing implants on the market.

protese total zirconia aplicada 50kb
Upper total dental prosthesis with milled zirconia framework and veneered with aesthetic dental ceramic on dental implant
protese zirconia pura 50kb

Pure zirconia or pure porcelain prosthesis for rapid implants: the gold standard in complete oral rehabilitation

Many people have the perception that a porcelain or zirconia prosthesis is a heavy piece and therefore not suitable for quick installation because it would hinder the healing of implants. But contrary to what it might seem, porcelain prostheses are much lighter than you might think. In addition to being the most modern and resistant options for the patient, they are also aesthetically superior.

By way of comparison, a full porcelain prosthesis weighs around 30g, while a tube weighs 25g. In addition, each dental implant supports a weight of 100kg, meaning that the weight of the prosthesis does not interfere with the implant.

The possibility of having a permanent porcelain prosthesis fixed on dental implants is a great relief for people who are determined to change their smile quickly. And no wonder. Pure porcelain or pure zirconia are undoubtedly the most advanced materials available for the manufacture of dental prostheses.

Firstly, Pure Zirconia and Pure Porcelain are the materials that most closely resemble natural teeth, both in strength and appearance. Secondly, because these materials have been designed for fabrication in computerized systems (CAD/CAM), which greatly speeds up the entire programming of rapid dental implant treatment.

Can anyone have rapid treatment with Slactive implants and porcelain prostheses?

As we have seen, advanced technology means that many more people have an indication for rapid dental implant treatment. However, each case needs to be assessed individually in consultation. Undeniably, oral health and health in general need to be well assessed before anything else.

In addition, certain habits that may prevent successful rehabilitation, such as smoking and bruxism, need to be considered. If you would like to have a treatment like this or find out more about rapid dental implants, please contact our team. Alternatively, you can schedule a consultation via Whatsapp by clicking on the button below. We at Clinica odontológica ImplArt would be delighted to hear from you!

Fixed dental prosthesis in pure 3D translucent zirconia

Among the latest material options for making a fixed prosthesis for a full arch implant, total implant or protocol prosthesis, we now have an innovative technique full of advantages: 3D pure translucent zirconia. Zirconia is currently the most modern material for both full and partial dental implant prostheses. It is also the most suitable material for dental crowns on single implants or fixed prostheses.

Zirconia dentures combine beauty and strength

Pure zirconia is also known as cubic zirconia, translucent zirconia, monolithic zirconia and black zirconia. It is currently considered the most modern and resistant material for making dental crowns.

Dental prostheses made from this material are fixed onto dental implants previously placed in the upper or lower jaw.

In order to offer patients the most modern treatments, the ImplArt dental clinic has once again innovated by pioneering the best European technology (Austria) to manufacture 3D zirconia dental prostheses in its own laboratory.

Its modern manufacturing allows treatment to be carried out using 100% computerized techniques, with complete digital planning of the case. This means more comfortable treatment for the patient, much more predictable, and above all, faster.

Translucent Zirconia
The translucent zirconia protocol prosthesis is completely white and contains no metal inside. As a result, the colors and shapes are more beautiful and natural.

Planning 3D zirconia implant/prosthesis treatment

For a complete treatment with dental implants, there must first be an extensive conversation between the dental surgeon and the patient. The definition of the total treatment takes place in 3 stages:

  • 1- Firstly: Planning the surgical and prosthetic aspects of the all-tooth or partial implant case. First of all, the patient’s needs are studied, with a clinical assessment and radiological examinations, so that the case can be planned precisely before it is carried out.
  • 2- Secondly: Performing the surgery to install the dental implants. At this point, a temporary transition prosthesis for the full arch should also be installed.
  • 3- Thirdly: Preparation of the final dental prosthesis. Once the implants have healed, the long-awaited making of the complete prosthesis begins, according to the material chosen by the patient at the start of their treatment.
Gumless dental zirconia prosthesis.
Zirconia dental prosthesis without gums. In some cases it is possible to make a zirconia dental prosthesis without the pink gum layer. In an acrylic dental protocol this would not be possible.

Not all protocol prostheses are the same and made of acrylic!

The choice of implant prosthesis material

Nowadays, you can choose from a variety of materials for fixed prostheses on implants (dental protocols). In the past, there were only metal-ceramics (metal structure and porcelain exterior) and acrylic (resin), made by hand.

Today, ImplArt is able to offer patients options with extreme resistance and superior aesthetics, such as computer-engineered translucent zirconia. In this sense, each type of prosthetic material can have an impact on the patient’s treatment in terms of price, preparation time and the final aesthetics of the total implant.

Therefore, in this article, we will explain the most modern model of fixed prosthesis on implants: the computerized translucent zirconia prosthesis, as well as its advantages and characteristics.

What is 3D dental zirconia? Zirconia is a white material that has the strength of a metal

Protese dentaria zirconia projeto computador sobreposicao 50kb
Zirconia dental prosthesis being designed on a computer, with a photo of the face superimposed. This gives us additional information about the lips, skin and gum colors, the shape of the teeth and the final appearance of the smile.

Types of zirconia prosthesis for dental protocols

Today there are three types of dental zirconia to better perform protocol prostheses on implants (fixed dental prostheses), namely :

  • 1. milky whitezirconia structure (lower volume), together with applied porcelain overlay (higher volume)
  • 2. 3Dtranslucent zirconia prosthesis (larger volume), i.e. with a small application of porcelain on the outside of the teeth (smaller volume)
  • 3.3D monolithic pure zirconia prosthesis (full volume) with make-up, so no additional porcelain applied
zirconia prosthesis being manufactured
The aesthetics of aesthetic zirconia fixed prostheses are unbeatable. Notice how translucent the material is and how beautiful and natural it looks.

What does the 3D translucent pure zirconia implant prosthesis look like?

In this type of zirconia prosthesis, there is only a small porcelain overlay on the structural part of the prosthesis. In short, the entire final process of making the monolithic zirconia prosthesis is done by computer programs and robotic machines( Digital Dentistry).

Therefore, we are sure that the fittings will be perfect, the anatomy will be that of natural teeth, and the colors will be realistic.

zirconia and translucency prosthesis
Dental zirconia protocol. Note that there is a small layer of translucent porcelain on the outside of the tooth to give it more shine, better color and more translucency. The rest of the prosthesis is solid and made of pure zirconia that has been tinted to match the natural color of the tooth and gums. The holes will be closed after the fixed prosthesis has been installed.

Advantages of the 3D zirconia protocol prosthesis

In contrast to metal as a structure, the main advantages of translucent zirconia are its biocompatibility, excellent aesthetics and extreme resistance. Zirconia, with the white structural part of the dental prosthesis, undeniably enhances the natural cosmetic characteristics of porcelain.

In fact, dental zirconia is exceptionally strong and durable as a base. So much so that the use of small portions of porcelain over this translucent zirconia structure provides complementary aesthetics for the complete implant.

In addition, zirconia is a super biocompatible and anti-allergenic material and is also used in white dental implant posts.

zirconia dental prosthesis internal structure
The structure of the zirconia dental prosthesis is white and, at this stage, not yet colored or shiny. In the next phase of the prosthetic work in our dental laboratory, the piece will come to life with the pigmentation of teeth and gums. The final colors depend on the consensus between the person’s taste and the dentist’s opinion. However, you can virtually choose any color from the available range. The most commonly used shades for porcelain zirconia teeth are B1, A1, BL4, A2, B2. For the gums, we try to follow the color of the patient’s natural gums, with the most common colors being STG4, STG5 and STG8.
Work on applying layers of ceramic. In the end, all the natural aspects of the teeth and gums will be reproduced, imitating their tones, textures and translucency.

Read more: Aesthetic cores for dental crowns

zirconia fixed dental prosthesis
Zirconia prosthesis with aesthetic ceramic application, ready to be installed on the implants

Superior aesthetics of 3DZirconia

Dental zirconia can be custom-made in such a way that it resembles the enamel and gum tissues, thus optimizing the aesthetic result.

Translucent dental zirconia is undeniably the best material for fixed prostheses on implants, as it offers translucency, naturalness and strength as a result.

First of all, it should be noted that the zirconia protocol prosthesis makes no noise when chewed, is not heavy, nor does it damage dental implants, and certainly not opposing teeth.

Translucent dental zirconia is a material that above all does not change color, does not stain and therefore does not wear out with use.

multlayer zirconia crowns
Observe the natural anatomical details of the finished porcelain and zirconia fixed dental prosthesis. This work is done in our in-house digital dental laboratory.

How are 3D translucent zirconia dentures made?

The ImplArt Clinic has all the infrastructure to make your zirconia fixed prosthesis in its own laboratory. Here’s how it works: a zirconia dental prosthesis is manufactured using computerized processes, starting with the milling of a solid block of zirconia.

Above all, because it is a CAD-CAM (computerized) job, your dental project is stored in our laboratory, so the original project can be printed again quickly, should the need arise.

Dental prostheses: versions with or without artificial gum are possible (but it depends on an examination to check feasibility). 1-Without gum layer; 2-Light gum layer; 3-With gum layer.

Maintenance of fixed 3D translucent zirconia dental implants

First and foremost, zirconia is extremely resistant and is certainly the strongest material for dental use. As such, its resistance is superior to porcelain and, of course, resin.

Maintenance for a zirconia prosthesis involves a visit to the dentist every 6 months for prophylaxis, in order to monitor oral health in the same way as recommended for all other patients.

The risk of the prosthesis fracturing is, above all, very rare, due to a characteristic of the material.

With regard to the color and shape of the teeth, these remain unchanged over time, making the material an excellent choice for its durability and, above all, long-term aesthetics.

It is always important to remember that, once treatment is complete, you should visit your dentist every 6 months for prophylaxis and to monitor the results of your treatment.

Digital dental laboratory within the ImplArt Clinic

The ImplArt dental clinic has its own digital prosthetics laboratory integrated with the office and the dental clinic. This is a way of offering our patients faster dental treatments and increasingly precise prostheses for every need.

In addition, Clinica dentaria ImplArt ‘s laboratory has the most modern equipment to offer the highest quality dental prostheses.

Why do we have our own dental laboratory?

After several years of suffering from the services of outsourced prosthetic laboratories, such as lack of punctuality, poor aesthetics and inadequate materials, we decided to set up a dedicated team and acquire our own equipment.

Since 2012, all our work can be carried out more quickly in our prosthetics laboratory, which is staffed by a specialized team and state-of-the-art systems within the clinic.

We were the first dental clinic in São Paulo and certainly one of the first in Brazil to offer these technologies.

The Cerec System works similarly to a 3D printer, which sculpts various types of dental crowns and prostheses out of a rough block of porcelain based on computerized designs customized for each patient.

The integration between laboratory and clinic certainly makes it possible to carry out much faster and more accurate work. Find out more by clicking here.

All the systems are based on the Cad/Cam system, in which the model is scanned by contact readers or by laser beams. All the information collected by the computer is sent over the internet.

In this way, the copings are produced individually by robots (3d tooth printers). Our dental laboratory can carry out a range of high quality procedures such as:

Watch the video below and learn a little about how Clinica Dentaria ImplArt‘s in-house dental laboratory works.

If you have any questions about dental prostheses, please contact us or book an appointment with our specialized team right now. We’d be delighted to hear from you!